Osaka TSF 300 M3 User Manual

OSAKA - F 200 / F 300 / TSF 200 / TSF 300 / M3 - User Manual - V.2 - PAG. 1
DIGITAL THERMOSTAT
REFRIGERATION
F 200 / F 300
TSF 200 / TSF 300
M3
User manual – Version 2
www.osakasolutions.com
INTRODUCTION
In this manual are the information necessary
for proper installation and instruction for use
and maintenance of the product, it is
recommended to read carefully and keep it.
To prevent erratic operation or malfunction of
the THERMOSTAT that can create dangerous
situations, damage to persons, things or
animals, please remember that the facility must meet and be
aware of the safety systems annexes necessary to ensure their
safety.
OSAKA SOLUTIONS or their legal representatives are not
responsible for misuse of THERMOSTAT or not conforming to
the characteristics of the THERMOSTAT.
Index
1
DESCRIPTION THERMOSTAT
1.1
GENERAL DESCRIPTION
1.2
FRONT PANEL DESCRIPTION
2
PROGRAMMING
2.1
QUICK SELECTION SET POINT
2.2
STANDARD PROGRAMMING PARAMETERS
2.3
PROTECTED PARAMETERS BY PASSWORD
2.4
CUSTOM PROGRAMMING PARAMETERS (LEVELS OF
PROGRAMMING PARAMETERS)
2.5
2.6
RESTORE FACTORY SETTINGS
KEYBOARD LOCK FUNCTION
3
WARNING FOR INSTALLATION AND USE
3.1
PROPER USE
3.2
MECHANICAL ASSEMBLY
3.3
3.4
ELECTRICAL CONNECTIONS
ELECTRICAL WIRING DIAGRAM
4
4.1
OPERATION
FUNCTION ON / STAND-BY
4.2
SETTINGS OF INPUTS PROBES AND DISPLAY
4.3
DIGITAL INPUT SETUP
4.4
OUTPUTS SETUP FOR RELAYS AND BUZZER
4.5
ACTIVE SET POINT SELECTION
4.6
TEMPERATURE CONTROL
4.7
COMPRESSOR PROTECTION FUNCTION AND DELAY
TO START
4.8
4.8.1
DEFROST CONTROL
AUTOMATIC START DEFROST
4.8.2
4.8.3
4.8.4
MANUAL DEFROST
END OF DEFROST
DISPLAY LOCK ON DEFROST MODE
4.9
EVAPORATOR FAN CONTROL
4.10
ALARM FUNCTIONS
4.10.1
TEMPERATURE ALARM
4.10.2
EXTERNAL ALARM DIGITAL INPUT
4.10.3
OPEN DOOR ALARM
4.11
4.12
4.12.1
4.12.2
4.12.3
OPERATION OF KEY “F” / AND “DOWN / AUX”
ACCESSORIES
CONFIGURATION PARAMETERS WITH “USB KEY”
REMOTE VIEWING "X2"
RS485 SERIAL COMMUNICATION WITH "CONV-TTL
RS"
5
PROGRAMMABLE PARAMETERS LIST
6
TROUBLESHOOTING, MAINTENANCE AND
WARRANTY
6.1
SIGNALS
6.2
CLEANING
6.3
WARRANTY AND REPAIR
7
TECHNICAL DATA
7.1
ELECTRICAL FEATURES
7.2
7.3
7.4
MECHANICAL FEATURES
FUNCTIONAL FEATURES
MECHANICAL DIMENSION AND SUBJECTION
1 – DESCRIPTION
1.1 – GENERAL DESCRIPTION
The F 200 / F 300 / TSF 200 / TSF 300 / M3 are microprocessor
digital thermostats, are suitable for refrigeration temperature with
ON / OFF control and intervals time for defrost, to regulate
temperature or continuous operating time compressor, electric
heater or hot gas for investment cycle. The device is equipped with
optimization functions and special defrosting functions used for
energy saving control.
Thermostats, depending on the model, available from 2 to 3 relay
outputs and 2 to 3 inputs for temperature sensors PTC or NTC and
also an internal buzzer for acoustic signalling ALARM and
programming.
Models F 200 / F 300 / TSF 200 / TSF 300 / M3 differ from other
standard models on the design and screen system keyboard.
1.2 – FRONT PANEL DESCRIPTION
Front Panel F 200 / F 300
F 200 / F 300
TSF 200 / TSF 300
M3

Osaka TSF 300 M3 Specifications

General

Brand	Osaka
Model	TSF 300 M3
Category	Thermostat
Language	English

Summary

PROGRAMMING

STANDARD PROGRAMMING PARAMETERS

Accessing and modifying standard programmable parameters.

PROTECTED PARAMETERS BY PASSWORD

Understanding and using password protection for parameters.

WARNING FOR INSTALLATION AND USE

ELECTRICAL CONNECTIONS

Guidelines for safe and correct electrical wiring and connections.

ELECTRICAL WIRING DIAGRAM

Visual representation of the device's internal and external wiring.

OPERATION

SETTINGS OF INPUTS PROBES AND DISPLAY

Configuring probe types, units, and display behavior.

DIGITAL INPUT SETUP

OUTPUTS SETUP FOR RELAYS AND BUZZER

TEMPERATURE CONTROL

Understanding ON/OFF regulation based on temperature and set points.

COMPRESSOR PROTECTION FUNCTION AND DELAY TO START

Features for protecting the compressor from frequent starts and delays.

DEFROST CONTROL

Overview of defrost control modes and parameters.

AUTOMATIC START DEFROST

Setting up automatic defrost cycles based on time intervals or conditions.

MANUAL DEFROST

END OF DEFROST

EVAPORATOR FAN CONTROL

ALARM FUNCTIONS

Configuring temperature alarms, external alarms, and open door alarms.

EXTERNAL ALARM DIGITAL INPUT

OPEN DOOR ALARM

PROGRAMMABLE PARAMETERS LIST

"i" Parameters for Digital Input and Probes

"r" Parámetros de Regulación de Temperatura

"d" parameters management "Defrost"

Parameters controlling defrost type, intervals, duration, and activation.

"F" Evaporator Control Parameters (Fans)

"P" Compressor Protection Parameters

Parameters related to compressor start delay and downtime protection.

"A" Alarm Configuration Parameters

Parameters for setting up temperature alarms, delays, and memory.

"o" Buzzer Outputs and Configuration Parameters

TROUBLESHOOTING, MAINTENANCE AND WARRANTY

FAILURE WARNINGS / ERRORS

Table listing error codes and their corresponding reasons and actions.

WARRANTY AND REPAIR