OSD Audio NERO-ARC Series User Manual

NERO-ARC4/6/8/SUB INSTA UIDE NERO-ARC4/6/8/SUB INSTA UIDE
Preparation:
Tools For Installation Speaker Wire Guide
Considerations
Included
Introduction
- Pencil
- Drill
- Tape Measure
- Wire Cutter
- Phillips Screwdriver
- Utility Knife
- Safety Eye Wear
- Gloves
- Where is the best place to install the speakers?
- Where do the speakers sound the best?
- Separate the speakers 6 - 10 feet apart.
The Nero-ARC Series Products are designed for high ceilings and open space environments. Featuring silk dome
tweeters and Graphite woofers with an aluminum rust resistant grille. A UV resistant enclosure makes it ideal for outdoor
applications as well. The Nero-ARC Series also comes with a built-in 6 position tap for 8 Ohm and 70/100V set-ups.
18AWG minimum - for distances up to …………………. 10 ft
16AWG - from …………………………………..…... 10 to 50 ft
14AWG - from …………………………………...… 50 to 100 ft
top cover eye hook & nut hanging cable
carabiner x2 screws x2
speaker
Hanging Information
Make sure the speaker is properly secured to the ceiling / building’s
structure. Please use the proper screws, bolts, or anchors (not included).
Failure to do so may cause the speaker to become unsecured & cause
potential damages / injuries.
Buckle part to fix connection cable
Ceiling
Pole
Carabiner
Hanging Cable
Eye Hook
Pendant Speaker
user manual

OSD Audio NERO-ARC Series Specifications

General

Brand	OSD Audio
Model	NERO-ARC Series
Category	Speakers
Language	English