KAMBER / KRESTA SERIES
8
FEATURE DETAILS
DIAGONAL SKI CARRY
M - 42L / 32L / 22L / 16L W - 40L / 30L / 20L / 14L
Diagonal ski carry utilizes one side of the bottom front panel webbing
and secures on the opposite side of the top front panel webbing.
2 Unbuckle the upper webbing
buckle. Place upper portion of
ski beneath the reinforced area
of upper compression strap so
they are diagonal across the
pack. Run the webbing beneath
the center fabric divider and
buckle strap.
1 Unbuckle the lower front panel webbing and pull it out of
its tuckaway sleeve. Place skis diagonal across pack with
the tails down and away from the buckle. Re-buckle and
tension the webbing strap.
2 Untuck the upper webbing strap. With the skis placed
diagonal across pack, run one side of strap through the
center fabric divider. Re-buckle and tension the webbing
strap securing the skis into place.
1 Loosen or unbuckle the lower webbing buckle, slide ski
tails underneath webbing on one side of the center fabric
divider. Place skis diagonal across the pack. Re-buckle
and tension webbing strap making sure the strap is
threaded through the center fabric divider.
1 Loosen or unbuckle the lower webbing
buckle, slide ski tails underneath
webbing on one side of the center
fabric divider. Place skis diagonal
across the pack.
Re-buckle and tension webbing strap
making sure the strap is threaded
through the center fabric divider.
2 Untuck the upper ski strap webbing from the tuckaway
pocket over the left shoulder of the pack's harness. Run the
webbing through the center fabric divider on the top of the
pack and buckle the strap over the skis you placed diagonally
in step 1. Tension the webbing to secure the skis into place.
M - 16L W - 14L
M - 22L W - 20L
M - 42L / 32L W - 40L / 30L
3 Use the cam-locking slider
buckle and webbing on the
side of the pack to tension the
skis into place for stable carry.
Reverse to remove skis from the
pack.
To Next Page
Loading...
Need help?
General
