18
Refer to further guidance below regarding the EMC environment in which the device should be used:
Guidance and manufacturer’s declaration – electromagnetic emissions
Össur Myoelectric Prosthetic Devices is intended for use in the electromagnetic environment specified below.
The customer or the user of the Össur Myoelectric Prosthetic Devices should assure that it each are used in
such an environment.
Emissions test Compliance Electromagnetic environment - guidance
RF emissions
CISPR
Not applicable
Battery Powered
Össur Myoelectric Prosthetic Devices use RF
energy only for its internal function. Therefore, its
RF emissions are very low and are not likely to
cause any interference in nearby electronic
equipment.
RF emissions
CISPR
Class B Össur Myoelectric Prosthetic Devices are suitable
for use in all establishments, including domestic
establishments and those directly connected to
the public low- voltage power supply network that
supplies buildings used for domestic purposes.
Harmonic emissions
IEC --
Not applicable
Battery Powered
Voltage fluctuations/ flicker
emissions
IEC --
Not applicable
Battery Powered
To Next Page
Loading...
