9
The individual Grip Chips are programmed using the My i-Limb app and can be reprogrammed by the user at any
time.
CLEANING
Clean i-Digits wristband, digits, cover and electrode surface can only be cleaned with a soft damp cloth and mild
soap.
Clean the electrode surface regularly.
Do not use any strong chemicals.
NOTE: do not submerge the i-Digits, wristband, cover, electrode surface or charger in water.
Clean the cover with isopropyl alcohol once a week to help with disinfection.
MAINTENANCE
– Always turn off the i-Digits when not in use.
– Charge the battery after use.
– Ensure the i-Digits is serviced every months.
– For all service or maintenance, contact your prosthetist.
TROUBLESHOOTING
Contact your clinician should any problems occur affecting the use of the i-Digits.
TECHNICAL SPECIFICATIONS
i-Digits
Voltage . V (nominal)
Max. current A
Battery capacity Rechargeable lithium polymer . V (nominal); mAh capacity
Max device load kg
Finger carry load (static limit) kg
Time from full open to full close . seconds
Expected service life years
Power Supply
Manufacturer XP Power
Model No. VEPUS
Input -Vac, -Hz, .A Max
Output VDC, A
To Next Page
Loading...
