7
6
Attachment Pin
Apply Loctite / onto the threads on the Attachment Pin and screw it
into the Locking Liner. Torque the Attachment Pin to Nm.
Caution: Use Attachment Pins for Icelock series only.
USAGE
Cleaning and care
Clean with a damp cloth and a mild soap. Dry with a cloth after cleaning.
Unscrew the Release Unit, blow with compressed air alternately between
the Pin hole and the hole for the Release Unit.
Caution: Do not use lubricant or any cleaning material. Only use air.
Regular cleaning is necessary to prevent compromise on function of
locking mechanism.
Environmental Conditions
The device is Weatherproof.
A Weatherproof device can be used in a wet or humid environment and
can tolerate being splashed by fresh water (e. g., rain), no submersion is
allowed.
No contact with salt water or chlorinated water is allowed.
Dry with a cloth after contact with fresh water or humidity.
Clean with fresh water in case of accidental exposure to other liquids,
chemicals, sand, dust, or dirt and dry with a cloth.
MAINTENANCE
The device and the overall prosthesis should be examined by a healthcare
professional. Interval should be determined based on patient activity.
To Next Page
Loading...
Need help?
General
