6
ENGLISH
Re-Flex Rotate and Re-Flex Shock are both referred to as the device in this
document. This document provides important information concerning
the indication for use and handling of the device. It is intended for use by
a certified prosthetist and the user of the device.
PRODUCT DESCRIPTION
Re-Flex Rotate is a mechanical foot with an integrate torsion and shock-
absorbing adapter (Rotate module), available with male or female
pyramid options.
Re-Flex Shock is a mechanical foot with an integrated shock-absorbing
adapter (Shock module) and a male pyramid.
The device consists of the following components (Figure ):
. Rotate / Shock module
. Male pyramid
. Female pyramid
. Foot module
. Torsion cell
. Front spring
. Spectra sock
. Foot cover
. Heel wedge
. Attachment clamp
. Collar
. Bellow
. Attachment clamp screws
INDICATIONS FOR USE
Lower limb amputation
CONTRAINDICATIONS
None known
INTENDED USE
The device is a non-invasive, reusable prosthetic device, designed for
single patient use. The device is to be used exclusively for the
exo-prosthetic fittings of people with lower-limb loss. The device
supports low to high impact levels.
TECHNICAL SPECIFICATIONS Figure , and
The following specifications are for a size category foot with foot cover:
Re-Flex Rotate Re-Flex Shock
Device weight with foot cover and Spectra sock: g / lb g / lb
Build height: See figure , See figure
Maximum user weight:
See category
selection chart
See category
selection chart
CATEGORY SELECTION CHART
Please refer to the selection chart below to determine the appropriate
category required according to Össur recommendations.
To Next Page
Loading...
Need help?
General
