COMMUNICATION WITH OTARI
FOR SERVICE INFORMATION AND PARTS
All Otari products are manufactured under strict quality control. Each unit is carefully inspected and tested prior to
shipment.
If, however, some adjustment or technical support becomes necessary, replacement parts are required, or technical
questions arise, please contact your Otari dealer or contact Otari at:
Otari, Inc. Otari Corporation
4-33-3 Kokuryocho, Chofu-shi, 378 Vintage Park Drive
182, Tokyo, Japan Foster City, California 94404
Telephone : 0424-81-8626 U.S.A.
Fax : 0424-81-8633 Telephone : (415) 341-5900
Telex : J26604 OTRDENKI Fax : (415) 341-7200
Cable : OTARIDENKI TOKYO
Otari Deutschland GmbH. Otari Singapore Pte., Ltd
Rudolf-Diesel-Str.12 40 MacTaggart Road
D-40670 Meerbusch (Osterath) Singapore 1336
F.R. Germany Telephone : (65) 284-7211
Telephone : (02159) 50861 Fax : (65) 284-4727
Fax : (02159) 1778 Telex : RS 36935 OTARI
Another part of Otari’s continuing technical support program for our products is the continuous revision of manuals
as the equipment is improved or modified. In order for you to receive the information and support which is applica-
ble to your equipment, and for the technical support program to function properly, please include the following infor-
mation, most of which can be obtained from the Serial number label on the machine, in all correspondence with
Otari:
• Model Number:
• Serial Number:
• Date of Purchase:
• Name and address of the dealer where the machine was purchased and the power requirements (voltage and
frequency) of the machine.
RADAR
Operation Manual
Edition 3
iv
To Next Page
Loading...
