oticon Corda miniFit User Manual

The following pictures illustrate how to
clean a hearing aid with a thin tube.
Cleaning the Corda miniFit (thin tube)
1. Detach the corda tube by pulling the tube away from the hearing
instrument.
2. Insert the cleaning tool into the top part of the tube and feed it all
the way through to the dome.
3. Carefully push the cleaning tool through the dome past the vent, without removing the dome.
Corda miniFit
PLEASE NOTE:
1. If the dome is
removed, always
replace with a NEW
dome.
2. Never re-attach a
used dome back onto
the tube.
3. If the dome is missing
DO NOT USE. Please
call audiology.
4. Always change the
dome & tube as one
unit - do not change
the dome on its own.
5. If the dome is pushed
too far and it comes
through the wax
guard please replace
the dome.

oticon Corda miniFit Specifications

General

Brand	oticon
Model	Corda miniFit
Category	Hearing Aid
Language	English

Summary

Cleaning the Corda miniFit Thin Tube

Detach Corda Tube

Detach the corda tube by pulling it away from the hearing instrument.

Insert Cleaning Tool into Tube

Insert the cleaning tool into the top part of the tube and feed it all the way through to the dome.

Clean Dome Vent

Carefully push the cleaning tool through the dome past the vent, without removing the dome.

Important Usage Precautions

Key notes on dome replacement, handling, and troubleshooting during cleaning.

Wipe and Re-attach Dome

Clean the dome and re-attach the corda tube to the hearing instrument with a simple click fit action.

Dome Placement Guidance

Properly place the dome in the correct position and advice on handling incorrect placement.