EasyManua.ls Logo

oticon Dynamo BTE13 SP - Page 21

oticon Dynamo BTE13 SP
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
40 41
About Start up Handling Options Warnings More info
Power instrument
This is a power instrument and
special care should be exercised in
selecting, tting and using a hearing
aid where maximum sound pressure
capability exceeds 132 dB SPL
(IEC 711), as there may be risk of
impairing the remaining hearing of
the hearing aid user.
Possible side eects
Hearing aids, moulds or domes may
cause an accelerated accumulation
of ear wax.
The non-allergenic materials used in
hearing aids may in rare cases cause
a skin irritation or other side eecs.
Please seek consultation with a
physician if these conditions occur.
Interference
The hearing aid has been thoroughly
tested for interference according
to the most stringent international
standards. However, interference
between the hearing aid and other
devices (e.g. some mobile tele-
phones, citizens band devices, shop
alarm systems and other wireless
devices) may occur. If this occurs,
increase the distance between
the hearing aid and the interfering
device.
Warnings
Connection to external equipment
The safety of the use of hearing
aid when connected to external
equipment (with an auxiliary input
cable and/or with USB cable and/or
directly), is determined by the exter-
nal signal source. When connected
to external equipment plugged
into a wall outlet, this equipment
must comply with IEC-62368 (or
IEC-60065, IEC-60950 until June 20,
2019) or equivalent safety stand-
ards.
Incompatible non-supplied
accessories
Only use accessories, transducers or
cables supplied by the manufacturer
of this device. Incompatible accesso-
ries may result in increased emission
or decreased immunity.

Related product manuals