38
Since Streamer can handle multiple audio sources, the following describes how Streamer
will react to various operations:
• If streaming ConnectLine TV and then audio is connected to the wired jack input, a
short press on the Audio button will first stop the TV sound. When the Audio button is
pressed again, streaming from the jack input starts (priority control).
• When the jack is removed, the TV sound does NOT automatically resume but must be
started by pressing the Audio button shortly again.
• If an incoming phone call is received while streaming TV sound or audio, the ringing
tune is played in the hearing instruments. A short press on the Phone button will accept
the phone call and stop the audio streaming. When the phone call is ended, the audio
streaming will automatically resume.
• If a phone call is active when the jack is inserted, the call is NOT terminated and press-
ing the Audio button will be discarded.
• When the jack is removed during wired audio streaming, Streamer automatically stops
the audio streaming and the hearing instruments return to standard program (P1).
• If a connected Bluetooth stereo player is started, audio streaming from this source is
automatically started but only if there is no TV streaming or wired audio streaming
available at the same time.
To Next Page
Loading...