EasyManua.ls Logo

oticon Streamer 1.4 - Pairing to a Bluetooth Device

oticon Streamer 1.4
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
48
If the connection is lost while listening to ConnectLine TV, the audio streaming stops
(after 5 seconds the hearing instruments return to the standard program (P1)). You may
start Audio streaming again when inside the ConnectLine TV range again.
If the connection is lost while listening to a Bluetooth stereo player, the streaming stops
(after 5 seconds the hearing instruments return to the standard program (P1)). The music
streaming may resume automatically when inside the range again (depends on the stereo
player).
6.9 Pairing to a Bluetooth device
Before using Streamer with a Bluetooth cell phone or a Bluetooth enabled audio source,
Streamer must be paired to the device. This means that a secure relationship is estab-
lished between the two units, enabling them to identify each other and communicate
whenever they are turned on and within range of each other.
You only have to make the pairing once as the units will hereafter recognise each other.
Pairing is done by putting both units (i.e. Streamer and the device) into pairing mode.
Units within range will automatically search for and find each other. (The units must be
kept only a few meters apart.)