oticon Streamer 1.4 - Connecting to Wireless Audio Source

37
6.4.2 Connecting to a wireless audio source
The Bluetooth connection between Streamer and the audio source must be prepared so
the two devices connect wirelessly to each other. This initial configuration of the devices
is referred to as pairing. If you have not paired Streamer to your ConnectLine adapter or
other Bluetooth audio source, you should follow the pairing guidelines in section 6.9 or
the specific ConnectLine adapter guide.
A wireless audio source can be connected to Streamer when:
• the Connect function of Streamer is turned on, and
• Streamer and the audio source is inside the Connect range
Both a ConnectLine TV adapter and another Bluetooth audio source can connect to
Streamer at the same time but only one can be activated at a time.
The ConnectLine TV adapter always has priority compared to other external Bluetooth
audio sources, e.g. a Bluetooth stereo device/player.