Safety shield
Item # 99-003-525
Cutting Fluid
For many lathe operations, cutting fluid is used
to reduce friction and improve chip clearance.
Proper use of cutting oil will extend tool life,
reduce stress on the lathe and improve the
quality of the cut surface. Modern cutting fluids
are specially formulated for specific metals and
operations. For most lathe work, a general-
purpose cutting fluid such as Tap-Magic or
Tapmatic is appropriate.
Tap Magic Cutting Oil
Item # 81-002-914
Tapmatic Cutting Fluid
Item # 81-007-050
When machining aluminum, a specially
formulated cutting fluid such as Tap-Magic
Aluminum will give superior results. It helps
prevent chips from welding to the cutting edges
of the tool – a common problem when
machining aluminum.
Tap Magic Aluminum
Item # 81-002-928
PDF created with pdfFactory Pro trial version www.pdffactory.com
To Next Page
Loading...