Need help?Do you have a question about the Otto Bock 3R20 and is the answer not in the manual?
General| Weight Limit | 125 kg |
|---|---|
| Amputation Level | Transfemoral |
| Knee Disarticulation | Yes |
| Material | Aluminum |
| Extension Assist | Yes |
| Category | Mechanical Knee |
| Weight Capacity | 125 kg |
| Water Resistance | No |
| Activity Level | Moderate |
| Product Type | Knee Joint |
| Mobility Grade | 2 |
| Swing Phase Control | Mechanical |
Explains the meaning of warning symbols used in the manual.
Details about the 3R20, 3R36 prosthetic knee joint and its features.
Specifies the product's exclusive use for lower limb exoprosthetic fittings.
Provides information and cautions regarding the fabrication process of a prosthesis.
Details on aligning the prosthesis on a bench, including screw connection warnings.
Instructions for checking and optimising the static alignment on a standing patient.
Guidance on gradually adapting settings to patient needs and explaining adjustments.
Instructions for adjusting the extension assist for proper swing phase mechanics.
Guidance on adjusting swing phase friction for optimal prosthetic foot swing.
Advice on fine-tuning settings, their interdependence, and safety aspects.
Provides essential information regarding product use and potential mechanical overload.
Instructions for cleaning the product and warnings about unsuitable agents.
Information on recommended lubricants and their application.
Guidance on replacing components and where to order them.
To Next Page
