Otto Bock 7E7 - Legal Information; Signification des Symboles

Ottobock | 177E7
3.5 Technical information
Distal connection Tube clamp
Max. exion angle 140°
Weight of the joint 340 g
Weight of connection technology 280 g
System height 33 mm
Material Titanium
Mobility Grade 2 + 3
Max. body weight 100 kg
4 Legal information
All legal conditions are subject to the respective national laws of the country of use and may vary
accordingly.
4.1 Liability
The manufacturer will only assume liability if the product is used in accordance with the descrip-
tions and instructions provided in this document. The manufacturer will not assume liability for
damage caused by disregard of this document, particularly due to improper use or unauthorised
modication of the product.
4.2 CE conformity
This product meets the requirements of the European Directive 93 / 42 / EEC for medical devices.
This product has been classied as a class I device according to the classication criteria outlined
in Annex IX of the directive. The declaration of conformity was therefore created by the manufac-
turer with sole responsibility according to Annex VII of the directive.
Signication des symboles
Français
AVERTISSEMENT
Mises en garde contre les éventuels risques d’accidents et de blessures graves.
ATTENTION
Mises en garde contre les éventuels risques d’accidents et de blessures.
AVIS
Mises en garde contre les éventuels dommages techniques.
INFORMATION
Autres informations relatives à l’appareillage / l’utilisation.
INFORMATION
Date de la dernière mise à jour: 2016-01-28
• Veuillez lire attentivement l’intégralité de ce document avant d’utiliser le produit.
• Respectez les consignes de sécurité an d’éviter toute blessure et endommagement du produit.
• Apprenez à l’utilisateur à bien utiliser son produit et informez-le des consignes de sécurité.
• Conservez ce document.