Otto Bock Harmony P3 - Safety Instructions

15
• User limitations which prevent the safe use of the product
3 Safety
3.1 Explanation of warning symbols
CAUTION
Warning regarding possible risks of accident or injury.
NOTICE
Warning regarding possible technical damage.
3.2 General safety instructions
CAUTION!
Risk of injury and risk of product damage
►
Comply with the product's field of application and do not expose it to excessive strain (see
page14).
►
Note the combination possibilities/combination exclusions in the instructions for use of the
products.
►
Do not expose the product to prohibited environmental conditions.
►
Check the product for damage if it has been exposed to prohibited environmental conditions.
►
Do not use the product if it is damaged or in a questionable condition. Take suitable meas
ures (e.g.cleaning, repair, replacement, inspection by the manufacturer or a specialist work
shop).
►
To avoid the risk of injury and product damage, do not use the product beyond the tested life
time.
►
To avoid the risk of injury and product damage, only use the product for a single patient.
►
To prevent mechanical damage, use caution when working with the product.
►
If you suspect the product is damaged, check it for proper function and readiness for use.
►
Do not use the product if its functionality is restricted. Take suitable measures (e.g.cleaning,
repair, replacement, inspection by the manufacturer or a specialist workshop).
►
Only use suitable liners (without a textile coating or with a partial textile coating) for pros
theses with Harmony vacuum pumps. This prevents skin irritation due to vacuum on the skin.
Signs of changes in or loss of functionality during use
Amongother factors, changes in functionality can be indicated by reduced prosthetic suspension.
4 Scope of delivery
Quantity Designation Reference number
1 Instructions for use –
1 Harmony P3 with functional ring –
2 Socket connector 2R134
1 Sound absorber 4Y360
1 Flange kit 4Y383
Spare parts
Designation Reference number
Functional ring 4X147=*
Service set for Harmony P3 4X148
Socket connector 2R117=0
Filter unit 4X632