Need help?Do you have a question about the Otto Bock z50 and is the answer not in the manual?
General| Brand | Otto Bock |
|---|---|
| Model | z50 |
| Category | Mobility Aid |
| Language | English |
Highlights critical risks such as fire hazards, uncontrolled movement, and explosive gases during charging.
Advises on safe operating practices like checking performance after cleaning and avoiding battery discharge.
Provides important notes regarding tool usage, clothing, securing the product, and reading instructions.
Lists all necessary tools for performing maintenance and adjustments on the z50.
Details mounting and removal of the control panel unit and its holder variants.
Explains the attachment and cable management for the central plug.
Covers the installation, disconnection, and general handling of the battery pack.
Explains battery capacity factors, charging advice, and risks of deep discharge.
Details the battery charger components, charging indicators, and charging process states.
Explains common error codes, their causes, solutions, and general charger safety.
Describes how to attach the battery case to the wheelchair frame using hook and loop flaps.
Instructions for removing the battery case and locating/replacing the fuse within the battery pack.
Explains the integrated motors and the symbols for push mode and drive mode.
Details procedures for removing and replacing the motor cover and the plastic grip for the brake release mechanism.
Advises on tire casing replacement and adjusting the z50 wheel height position.
Explains how to set active or passive mounting positions using adapter plates.
Covers standard and swinging anti-tippers and how to mount the swinging version.
Details how to remove the joystick cap and install accessories, securing them with an Allen screw.
Explains how the adapter plate for the z50 is attached to the frame using screws.
Provides a template for recording customer details, wheelchair condition, and maintenance checks.
To Next Page
