6
LCD Switch
Display the power and usage status of the product.
Cooling air inlet/outlet
The cooling fan will run automatically when the product reaches a certain temperature during
use. Please avoid blocking the cooling air inlet/outlet and do not place objects within 30cm
of the cooling air inlet/outlet during the use of the product.
PV/DC input port
The product can be charged by connecting the solar panel with the standard PV/DC port
charging cable. The input of the solar panel can be up to 1000W, with the maximum voltage
being 120V. If the PV/DC input port is charged with a voltage higher than 120V, the product
will be damaged.
AC fast/slow charging switch
When using the AC fast charging gear, you need to ensure that the output voltage of the
power supply device meets 200-240V. When the output voltage of the charging equipment is
200-240V, the maximum charging power is 1800W.
AC charging port
After connecting the utility power to the AC charging port using the standard AC charging
cable, you can charge this product. Please ensure that the AC voltage and frequency of the
device are consistent with the utility power before using the AC port for charging.
Overload protection button
In case of unstable power voltage supply due to lightning or other reasons, or if there is a
large voltage input at the AC terminal, the overload protection function (safety circuit
breaker) will be activated to protect this product and other connected devices.
Please restore the AC input function of this product in the following order.
First, turn off the power button and unplug all ports. Next, after you confirm that there is no
abnormality in each part, turn on the power button. Finally, press the overload protection
button and turn on the AC cable to resume AC input.
Pull rod extension/retraction button
Pressing this button enables the extension/shortening function of the pull rod.
To Next Page
Loading...
