EasyManua.ls Logo

OUKITEL P5000E - Powering Options; UPS Mode Power Output; Solar Panel Charging

OUKITEL P5000E
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
Once you turn on the electrical device, it makes use of grid AC power directly. When the
utility power is cut off while in this state, it will automatically switch to the generators internal
battery power.
With the US or Japanese standard in UPS mode, if the maximum AC output power is less than
1400W and the AC output exceeds 1400W, the UPS icon blinks, indicating an overload and
while the AC icon is off, the output is interrupted.
With the European, British, Chinese or Korean standard in UPS mode, the maximum power
output of AC is below 2000W. If the AC output exceeds 2000W, the UPS icon flashes to
indicate overload, while the AC icon goes out and the output is interrupted.
Solar Panel Connection Solution
This product can be both connected to and charged by the solar panel. With a solar panel
power of 1000W (and maximum input voltage of 120V), at least 5.2 hours will be enough to
charge the battery completely.
Note that with solar panels, factors like weather play an important role. Do not use solar
panels with voltage over 120V, as such panels may damage the device and void its warranty.
Solar charging, option 1:
Solar panel
AC Input
PV port

Related product manuals