Ourmeter LCD-S900 - Speed Limit Configuration; Reset All Parameters; Error Code Definitions; Error Code Reference Table

1) P07-speed limit
：
short press /
2) P11-
Reset all parameters
long press
5 seconds
reset to default values(except for the ODO distance)
5. E
rror code definition
When an error appears,
codes, please refer to table 1 for different codes:
状 态 代 码
(十进制)
0
2
3
4
5
8
-
7 -
：
to set the speed limit from
15
Reset all parameters
：
5 seconds
，when it displays “SSSS”，
all parameters
reset to default values(except for the ODO distance)
rror code definition
When an error appears,
S900
will notice users by different
codes, please refer to table 1 for different codes:
状 态 代 码
状态意义
Normal
Short Circuit Protection
of Motor
Controller Error
Throttle Error
Motor Error
Low Battery Level
15
to 45Km/h.
all parameters
will notice users by different
of Motor