Need help?Do you have a question about the Ourmeter LCD-S700 and is the answer not in the manual?
General| Model | LCD-S700 |
|---|---|
| Category | Bicycle Accessories |
| Brand | Ourmeter |
| Display | LCD |
| Type | Bicycle Computer |
| Handlebar Size | 22.2mm |
Details the main materials, colors, and installation dimensions for the LCD-S700 display unit.
Provides a general overview of the LCD-S700's functions, including speed, mileage, battery, and controls.
Describes the 10-segment energy indicators for battery power display.
Explains the display of AVG SPEED, MAX SPEED, and real-time SPEED.
Details the display format for speed in Km/h and MPH.
Shows the 'WALK' indicator for the 6KM power-assisted mode.
Illustrates the display of current assisted gear levels (0-5).
Indicates when the headlight and backlight are activated.
Covers display of TRIP and cumulative mileage (0D0).
Shows the duration of riding time.
Explains the display of 'ERROR' and error codes for detected faults.
Details the function of the three external keys: UP, MORE, and DOWN.
Procedure for powering the instrument on and off, including auto-shutdown.
How to switch between real-time, max, and average speed displays.
Cycling through TRIP, ODO, Riding Time, and Error Code displays.
Selecting assistance levels from 0 to 5, with default stall 1.
Instructions for turning the bike's headlights on and off.
Activating and using the 6KM walk assist function.
Procedure to enter and exit the system parameter setting state.
Adjusting backlight brightness from 1 (darkest) to 3 (brightest).
Switching display units between km/h and mph.
Setting the supported voltage range (e.g., 36V).
Configuring the automatic shutdown time when idle.
Configuring the number of assistance levels (3, 5, or 9 stalls).
Setting the wheel diameter for accurate speed readings.
Setting the number of magnetic steels for speed measurement.
Setting the speed limit range from 0 to 100 km/h.
Configuring startup mode: zero start or non-zero start.
Selecting the drive mode: power, electric, or combined.
Adjusting the sensitivity of pedal assistance.
Setting the strength of the power start function.
Selecting the type of booster disk (e.g., 5, 8, 12).
Setting the controller's current limit (1-20A).
Displaying the controller's undervoltage threshold.
Procedure to reset the cumulative mileage to zero.
Restoring the instrument to its default factory settings.
Specifies supported power supply voltages (24V, 36V, 48V).
Indicates the rated working current of the meter (10mA).
States the maximum working current for the meter (30mA).
Specifies the shutdown leakage current (less than 1uA).
Indicates the working current of the supply controller (50mA).
Specifies the operating temperature range: -18 to 65°C.
Specifies the storage temperature range: -30 to 80°C.
Explains the ERROR icon and codes (0-11) for vehicle faults.
Notes on starting/shutdown interval and not pressing MODE when off.
Precautions for safe driving and avoiding harsh conditions.
Impact of low temperatures on screen visibility.
Steps for startup problems, checking wire harness contact.
Guidance on what to do when a fault code is displayed.
Details warranty period and conditions for the instrument.
Notes that the specification is a universal version for S700.
To Next Page
