www.cyrusher.com
7 / 29
7.)Mileage Mode :including the single mileage TRIP and the cumulative mileage 0D0,
8.)Riding Time: displays the riding times
9.)Error code display: ERRO and error code are displayed when the fault is detected
4.External key definition.
LCD-S700 adopts the LCD part and external three - to - button separation in the form
of design, the communication is connected by the bottom lead.
There are three keys, using the key replaces “UP”, replaces
“MORE”, replaces “DOWN”.
5.Instructions for operating methods and functions
1.)Starting up shutdown
Long-press the MODE button for 3 seconds when the instrument is off, the instrument
fully shows and starts working, turn on the controller power; In boot state , long press
the button for 3 seconds, the cyclocomputer be power off and close the
controller power supply. If there is no riding or not any operations to the instrument in
10 minutes( set time by the user), the instrument will power off
automatically. In the
shutdown state, the power consumption of the instrument and the controller is 0.
The instrument boot display interface is as the image 1 shown.
2）Speed Mode Switch
Long press the button and to change the display information of speed,
show the real-time speed → the max speed → the average speed cyclically.
Display interface of speed mode、riding time are as the image 2,3,4 shown.
To Next Page
Loading...
Need help?
General
