Installation & Programming Manual FX & VFX Series Inverter/Charger System Copyright 2003 OutBack Power Systems, Inc.
900-0027-1 19009 62
nd
Ave NE, Arlington WA 98223 USA
Page 1 Rev 7.2 08/26/05 Tel 360 435 6030 Fax 360 435 6019
OutBack Power Systems
“Americas” and “Mobile”
FX and VFX Inverter/Charger
Installation and Programming Manual
Document Revision 7.2
FX 2012T - 2.0 kW / 12 VDC / 120 VAC / 60 Hz (Sealed + Turbo / Americas)
FX 2524T - 2.0 kW / 24 VDC / 120 VAC / 60 Hz (Sealed + Turbo / Americas)
FX 3048T - 2.5 kW / 48 VDC / 120 VAC / 60 Hz (Sealed + Turbo / Americas)
VFX 2812 - 2.8 kW / 12 VDC / 120 VAC / 60 Hz (Ventilated / Americas)
VFX 3524 - 3.5 kW / 24 VDC / 120 VAC / 60 Hz (Ventilated / Americas)
VFX 3648 - 3.6 kW / 48 VDC / 120 VAC / 60 Hz (Ventilated / Americas)
FX 2012MT - 2.0 kW / 12 VDC / 120 VAC / 60 Hz (Sealed + Turbo / Mobile)
FX 2524MT - 2.0 kW / 24 VDC / 120 VAC / 60 Hz (Sealed + Turbo / Mobile)
FX 2532MT - 2.5 kW / 32 VDC / 120 VAC / 60 Hz (Sealed + Turbo / Mobile)
VFX 2812M - 2.8 kW / 12 VDC / 120 VAC / 60 Hz (Ventilated / Mobile)
VFX 3524M - 3.5 kW / 24 VDC / 120 VAC / 60 Hz (Ventilated / Mobile)
VFX 3232M - 3.2 kW / 32 VDC / 120 VAC / 60 Hz (Ventilated / Mobile)
“T” stands for Turbo “M” stands for Mobile
The “Sealed” version of the FX The “Vented” version of the FX
The “Turbo Kit” that comes with the FX “T” series is shown on page 15
Please check our website at www.outbackpower.com
for the latest product information
To Next Page
Need help?
General
