22
PROGRAM
Selects one of the available configurations (P1, P2, P3 and P4
couple P1/P3 or P2/P4) if the PROGRAM LOCKED parameter is not enabled.
This key is active, when the printer is offline or when the printer is online and no
print data are in the buffer.
When
pressed while powering the printer on, selects the offset adjustment page.
See “Offset Adjustment” later in this manual.
ON LINE
Toggles the printer between online and offline status.
When pressed while powering the pri
nter on, selects the Self Test printout. See
“Printing a Test Page” in this manual.
To Next Page
Loading...