EasyManua.ls Logo

OUTXE PCPB20000WS - How to Charge the Power Bank

OUTXE PCPB20000WS
7 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
How to Charge the Power Bank
Connect the power bank to a charger (Output: DC 5V 0.5A~3A),
Using the supplied USB charging cable. All indicators will stay lit
when the charging is finished.
10-11
Notes
With two inputs, you can either use the Micro USB or Type C input to
recharge. When using the Micro USB input (5V 2A), a full charge takes 13
hours. With Type-C input (5V 3A), a full charge takes 10-11 hours. If you
have a multi-port charger or multiple charges, you can use double inputs, it
takes 6-7 hours to get a full charge.
Simply leave the PCPB 20000WS in the sunlight for solar charging, there
is no need to press any buttons. When charging begins, the last indicator turns
RED. It takes about 75 hours to get a full charge due to the limited solar panel
size and conversion rate. Solar charging is recommended for emergency use
only.Please fully charge your unit from a wall outlet before going outdoors.
When the fifth indicator flashes or illuminates, the battery is too active.
Pl
e
a
se
do
nt
pl
ace
the
po
wer
b
ank in
the
sun
t
o
c
ha
r
ge
,
if you do, you
may damage the battery.

Related product manuals