Oval SU1308 - General Specifications

E-73-2-E
7
Item Description
Input signal
Pulse Type
Companion Pulse
Generator
Power to Pulse
Generator
8V 2-wire current pulse OPTO 01, 02 8.5VDC
Current
capacity
40mA max.
approx.
(Shortcircuit
protection
circuit
provided)
Contact-closure pulse PG20 13.5VDC
2-wire, 12VDC 3-wire
voltage pulse
PG30, NPG60A（F） 13.5VDC
24VDC 2-wire current pulse
(4/20mADC)
PA14, 15, 25, NPG60A（E） 24.0VDC
12VDC 2-wire current pulse PG30S 13.5VDC
Open collector pulse
FLOWPET-EG, NPG60A (E3),
MOS-FET
13.5VDC
32VDC 3-wire open
collector pulse
PA11 32.0VDC
Frequency response 500Hz Max. (50Hz max. with PG20)
Signal Open MOS-FET, 3 outputs
Capacity
230VAC/340VDC 0.2A
Resistance during ON: 16 Ω max. Leakage current during OFF: 1 μ A max.
Output pulse
width
One-shot 1ms, 50ms
Upper cuto󱐯 in width of pulses sync with input 10ms, 100ms
Duty sync with input 1:1
(Corresponds to output frequency range 4 to 200Hz. Below 4Hz,
100ms one-shot)
Power source 85 to 264VAC 50/60Hz or 20 to 30VDC
Power consumption 8VA approx.
Ambient temperature － 10 to ＋ 50℃
Insulation resistance
Across power terminals tied together and output terminals tied together:
10M Ω min. (500VDC insulation resistance tester)
Withstanding voltage
Across power terminals tied together and output terminals tied together:
1500VAC for one minute. With DC power: 1000VAC for one minute
Mounting Plug-in type
Enclosure Plastic molding, black
Weight 0.5 kilogram approx.
Accessory furnished 11-pin surface mount socket, quantity one
9. GENERAL SPECIFICATIONS
Output signal