EN
Camera use
Installation
1. Insert the microSD card into the camera.
2. Attach the camera to the rear mirror in the car.
3. Connect the feeder cable to the car lighter, and miniUSB tip
to the camera.
4. You can connect the rear camera to AV-IN port. The rear camera also
has an additional wire (red) which must be connected to reversing li-
ght supply (+12V). Once you have made a connection, when you shift
into the reverse gear, the display shows the rear camera preview.
5. Set the camera lens properly to frame the image.
6. Start the car. The camera should activate and start recording auto-
matically.
Interface
Battery level
Mode
Block files
Record/picture
Record sound
Display camera
Return
To Next Page
Loading...
