EN
• G sensor – when the feature is active, when detecting overloads
(vibration, crash), the recorded file is secured against deleting.
You can select the sensitivity level: low, medium or high.
• Parking mode – when the feature is active and the camera is inac-
tive, when detecting overloads (vibration, crash), the camera will
turn on and start recording. You can select the sensitivity level:
low, medium or high.
2. Picture settings
• Resolution – lets you select picture resolution.
• Serial pictures – when the feature is active, the camera takes
5 pictures in a row.
• Quality – selection of picture quality.
• Sharpness – selection of picture sharpness.
• White balance – selection of white balance feature.
• ISO – selection of ISO.
• Exposure – sets the camera exposure.
• Time stamp – activates or deactivates time stamp in the pictures.
3. Features
• Night mode – activates or deactivates night mode.
• Automatic shut-down – the camera switches o after a specific
period of time if it does not record anything.
• Screen saver – selection of time after which the screen shuts
down. When the screen is o, the camera may keep on recording.
• Interface sounds – activates or deactivates interface sounds.
• Language – selection of interface language.
• Frequency – selection of frequency in order to avoid deformation
at artificial light.
• Volume – sets sounds volume.
• Format – formats TF card after confirmation.
To Next Page
Loading...
