12
Preparation before Installation
Unpack the Package
Before you begin the installation of Live-FSH16T Fast Ethernet Switch, make sure that you have all
the necessary components that come with your package. Follow the steps below to unpack your
package contents:
Step 1. Clear out the surrounding area for an adequate space to unpack the package carton.
Step 2. Open the shipping carton and take out the package contents carefully.
Step 3. Put back all the shipping materials such as plastic bag, paddings and linings into the
shipping carton and save them for possible future transport need.
After unpacking and taking out all the components, you should check your package contents to see
if you’ve got all the following items:
Live-FSH16T Fast Ethernet Switch
One DC power Adapter
Wall-mounting kit (screws and wall-anchors)
This User’s Manual (can be found on Support CD-ROM)
Quick Start Guide
If any of these components is missing or damaged, please contact your local dealer for replacement.
Fig. 2-1 Package Contents
To Next Page
Loading...
Need help?
General
