19
Fig. 3-4 RJ-45 connector pin assignments
Fig. 3-5 Pin assignments for straight-through cabling
Connecting to power
Live-FSH16T is accompanied with an external power adapter unit, which is specifically
designed for the line voltage and the type of AC outlet used in your location. This power
adapter provides the voltage, amperage, and polarity required by the Switch (7.5V
DC
@2A,
inside positive, outside negative) and is outfitted with the correct type of barrel connector
for the DC power jack on the rear panel.
After verifying that the DC power adapter cord is suitable for use, just plug the male end of
the DC power adapter into a power outlet on the wall; and plug the barrel connector of the
power adapter into DC power jack on the Switch. Once you have correctly plugged in the
power, the Switch is activated.
To Next Page
Loading...
Need help?
General
