OWC ENVOY INTRODUCTION
2
1.4 PORT VIEW
1
1.4.1 Connectivity Features
1. USB 3.0 port — Attach the included USB 3.0 (Standard-A to Micro-B) cable here.
NOTE:
• The OWC Envoy is designed to receive all needed power through the USB cable,
therefore a separate power adapter is not necessary.
• For the safe removal of your drive and to assure that no data is lost, always eject or
unmount the drive from your operating system before powering off.
1.5 LED INDICATOR
The OWC Envoy has an LED indicator on the top, as shown in the picture below. The LED
emits a solid blue light when the unit is powered on and flashes during drive activity.
LED indicator
To Next Page
Loading...
