MERCURY ELITE PRO DUAL
INTRODUCTION
2
1.4 FRONT VIEW
Power LED — This LED will emit a solid blue
light when the Mercury Elite Pro Dual is on.
During drive activity the LED will blink blue
steadily, and during a rebuild the LED will
pulse blue slowly.
HDD1 / HDD2 LEDs— These LEDs represent
the two hard disk drives (HDDs) inside the
Mercury Elite Pro Dual. During normal activity,
these LEDs will remain o. If one of the hard
drives inside the Mercury Elite Pro Dual fails,
or if one of the drives is removed without the
RAID mode being reset, the corresponding
LED will blink red.
1.5 REAR VIEW
Power HDD2HDD1
1
4
5
6
2
3
To Next Page
Loading...
