OWC Mercury Elite Pro Assembly Manual

OWC Mercury Elite Pro Chapter 1 - Introduction
1 INTRODUCTION
1.1 System Requirements
1.1.1 Mac Requirements
•Minimum PowerPC G4 CPU, 128MB RAM
•eSATA interface, Mac OS X 10.3 or later
•FireWire interface, Mac OS X 10.2 or later
•USB 2.0 interface, Mac OS X 10.2 or later
1.1.2 PC Requirements
•Minimum 500MHz Intel Pentium III CPU, 128MB RAM
•eSATA interface, Windows XP / Vista / Windows 7
•FireWire interface, Windows 2000 / XP / Vista / Windows 7
•USB 2.0 interface, Windows 2000 / XP / Vista / Windows 7
1.1.3 Supported Hard Drives
•Any 3.5” SATA hard drive
•Any 2.5” SATA Solid State Drive (SSD) (when used with auxiliary bracket, not incuded)
1.2 Package Contents
Item
➀ Power Supply
➁ Power Cable
➂ OWC Mercury Elite Pro
➃ Vertical Stand
➄ USB 2.0 (A-B) cable
➅ FireWire 400 (1394A) Cable
➆ FireWire 800 (1394B) cable
➇ eSATA cable
➈ Software CD Bundle (not all models)
➉ User Guide & Owner’s Manual
Not pictured: Screw Pack (inside enlosure)
Assembly Manual
OWC Mercury Elite Pro
1.3 About This Manual
Firmware, images, and descriptions may vary slightly between this manual
and the unit shipped. Functions and features may change depending on
the rmware version. Please visit the product webpage for the most recent
specications.
➀
➁
➂
➄
➃
➆
➅
➇
➈
➉

OWC Mercury Elite Pro Specifications

General

Number of storage drives supported	1
FireWire 800	Yes
Product color	Aluminum
Data transfer rate	5 Gbit/s
Cables included	AC, eSATA, FireWire, USB