1.4 REAR VIEW
1. On / Off Switch
2. Power Input
3. Kensington® Security Slot
4. USB 3.0 Port
5. USB Expansion Port
OWC MERCURY ELITE PRO
INTRODUCTION
2
1.5 USAGE NOTES
LED - The Mercury Elite Pro has an LED mounted behind the front cover. The LED emits a
solid, white light when the unit is powered on and it flashes during hard drive activity.
Large Volume Support - For the computer to access volumes larger than 2TB, the operating
system needs to support large volumes (e.g. Windows Vista® or OS X 10.3.9 and above).
Cabling - Once assembled, you may plug the power supply into a power outlet and into the
Mercury Elite Pro. Then connect the USB 3.0 cable into the drive and the computer.
Dismounting - For the safe removal of the Mercury Elite Pro and to ensure no data is lost,
always unmount the drive from your operating system before powering off the device. For
more information about unmounting your drive from a Mac or PC, see Section 3.2 of this
manual.
1
2
3
4
5
.
To Next Page
Loading...
