4.1 Troubleshooting
Some of the most simple problems can be traced to power, or connectivity issues.
Verify that your cables (both ends!) are properly plugged into the computer and stor-
age solution. If they are, and the storage solution is still not working properly, try con-
necting to another interface such as the USB connection and see if the device works
properly. If these suggestions do not work, try the OWC Mercury Elite-AL Pro on a
dierent computer, if available to you.
• Disk is recognized, but unable to be accessed.
If the disk is recognized by the System, but you’re having trouble accessing it, try using
the Repair Disk and Repair Permissions options in the Disk First Aid pane of OS X’s Disk
Utility or using a commercial piece of software such as Alsoft’s Disk Warrior or Prosoft
Engineering’s Drive Genius.
• Drive does not show up at all
If your OWC Mercury Elite-AL Pro drive is not being recognized at all, begin by checking
some basic possibilities, such as:
• Are all cables tightly attached to the computer and drive?
• Have you tried a dierent cable and/or port?
• Further Troubleshooting
For further troubleshooting tips, visit our FAQ section online at:
http://eshop.macsales.com/tech_center/FAQ/index.cfm
If you are still experiencing problems, please contact OWC Technical Support. Contact
information is available in chapter 6.
OWC Mercury Elite-AL Pro Chapter 4 -Troubleshooting & Tips
4 TROUBLESHOOTING & TIPS
To Next Page
Loading...
Need help?
General
