OWC MERCURY HELIOS 3 User Manual

OWC Mercury Helios 3
Device Setup
5
2.1 Assembly
Please follow the steps below to install a PCIe card in the OWC Mercury Helios 3.
The Helios 3 and your PCIe card are static-sensitive devices.
They are susceptible to invisible damage if not protected during
installation. For proper grounding, we recommend using a grounding
strap. Work in a clean, static-free area, and avoid wearing clothing
that retains static charges. Please visit this URL for more information:
www.owcdigital.com/anti-static
1. Loosen the thumbscrews on the rear panel
until they spin freely. These are captive screws;
they cannot be removed.
2. Set the Helios 3 on its side, then grip the front
grill and pull the inner-chassis so that it slides
out of the outer-enclosure.
3. Set the inner chassis on a working surface, with
the rear ports oriented to the left, as shown.
DEVICE SETUP

OWC MERCURY HELIOS 3 Specifications

General

Brand	OWC
Model	MERCURY HELIOS 3
Category	Chassis
Language	English