Changes:
The material in this document is for information purposes only and subject to change without notice.
While reasonable efforts have been made in the preparation of this document to assure its accuracy,
OWC, its parent, partners, affiliates, officers, employees, and agents assume no liability resulting from
errors or omissions in this document, or from the use of the information contained herein. OWC
reserves the right to make changes or revisions in the product design or the product manual without
reservation and without obligation to notify any person of such revisions and changes.
FCC Statement:
Warning! Modifications not authorized by the manufacturer may void the user’s authority to operate
this device.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference with radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in which case
the user will be required to correct the interference at his own expense.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference with radio
or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Health And Safety Precautions:
Use proper anti-static precautions while performing the installation of your drives into this drive
enclosure. Failure to do so can cause damage to your drive mechanisms and/or the drive enclosure.
Read this user guide carefully and follow the correct procedures when setting up the device. Do
not attempt to disassemble or modify the device. To avoid any risk of electrical shock, fire, short-
circuiting or dangerous emissions, never insert any metallic object into the device. If it appears to be
malfunctioning, contact technical support.
Never expose your device to rain, or use it near water or in damp or wet conditions. Never place
objects containing liquids on the drive, as they may spill into its openings. Doing so increases the risk
of electrical shock, short-circuiting, fire or personal injury.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
