To Next Page

To Previous Page

OWC MerCury raCk PrO IntrOduCtIOn

1.1.3 Supported Hard Drives

•Up to four 3.5” SATA drives (1.5Gb/s, 3.0Gb/s, or 6.0Gb/s)

•Drives of identical model are required for all RAID types other than Clear/JBOD (Inde-

pendent Drive) mode and Combine/JBOD (SPAN) mode.

1.2 PACKAGE CONTENTS

FireWire 800

(1394b) cable

eSATA cable

Desktop feet

with Phillips screws (4)

Rack handles (2)

USB 3.0

(A to Standard-B) cable

Power cable FireWire 400

(1394a) cable

INTRODUCTION

Phillips screws for rack

handles (8)

1.3 ABOUT THIS MANUAL

Firmware, images, and descriptions may vary slightly between this manual and the unit

shipped. Functions and features may change depending on the ﬁrmware version. Please

visit the product webpage for the most recent speciﬁcations.

1.4 FRONT VIEW

1.1.1 Mac Requirements

•PowerPC G4 CPU, 128MB RAM

•eSATA: Mac OS X 10.3 or later

•FireWire: Mac OS X 10.2 or later

•USB 3.0 (backwards compatible to

USB 2.0): Mac OS X 10.2 or later

1.1.2 PC Requirements

•500MHz Intel Pentium 3 CPU, 128MB RAM

•eSATA: Windows XP or later

•FireWire: Windows 2000/XP or later

•USB 3.0 (backwards compatible to USB

2.0): Windows 2000/XP or later

1.1 MINIMUM SYSTEM REQUIREMENTS

Bumpers for rack handle

screw holes (2)

OWC Mercury Rack Pro Assembly Manual & User Guide

Other manuals for OWC Mercury Rack Pro