OWC ThunderBlade V4 - Page 6

OWC ThunderBlade V4
Mac & PC Setup
4
4. Type ‘Create’ in the search eld next to the Start menu. From the results, choose
‘Create and format hard disk partitions’ to open Disk Management.
First-time SSD Users
If you’ve never connected an SSD to your PC before, your Disk Management
window will look like the one below (note only 1 of the 4 SSDs are shown -
bottom panel). If you have connected SSDs before, skip ahead to the next page.
After a short time the ‘Import Foreign Disks’ dialog will appear. Click OK.
Next the ‘Foreign Disk Volumes’ dialog will appear. Click OK.