19 GB/CY
11. After this, the LC display returns to the de-
fault display.
Displaying summer time
Summer time is indicated by the DST symbol
14
in
the LC display. The temperature station
au-
tomatically detects from the DCF radio signal
whether it is summer time or not.
Calling up the time zone
The default display shows the time zone ac-
cording to the information provided by the
DCF signal.
Press the CLOCK button
22
. The time
zone
16
appears in the LC display.
Press the CLOCK button again to return
to the default display.
Setting the alarm time
You can set two different alarm times.
1. Press and hold down the ALARM button
21
for about 3 seconds.
Note: If an alarm time has been set be-
fore, then that previously set alarm time
appears in the LC display. If not, then the
display shows 0:00 or AM 12:00.
2. The hour display flashes. Press the SET /
RESET button
20
to set the desired value.
3. Press the ALARM button to confirm your
settings. The minute display flashes.
To Next Page
Loading...
Need help?
General
