19 GB
Settings
ATTENTION: Firmly touching the top of the housing will turn on the
backlight (Fig. E). Five seconds after releasing it the display backlight
will turn off again.
Please note, the base station does not respond to two buttons being
pr
essed at once. Hence, if the unit does not respond to a button being
pressed, you are probably also pressing the SNOOZE/LIGHT field.
Release when this occurs!
Basic settings
Press and hold the SET/HISTORY button
13
for 3 seconds to
change the basic settings.
Pressing the UP button
14
or the DOWN- / -button
15
allows
you to now change the respective flashing value.
TIP: Pressing and holding the UP button or the DOWN- /
-button
will quickly scan ahead or back through the numbers.
ATTENTION: When no buttons are pressed for approx. 20 seconds
the base station will return to base mode.
Briefly pressing the SET/HISTORY button will confirm the setting
and switch to the next option in the clock settings.
This allows you to change the following settings in sequence:
Note: If the weather station has received the DCF signal the year,
month, day, hour and minute settings will remain unchanged. If you
are in a different time zone than Germany you may set your local
time under time zone.
To Next Page
Loading...
Need help?
General
