28 GB/IE/NI
manually activate reception of the signal. To do so, press and hold the
CH button
15
for three seconds until the channel symbol flashes.
Following successful reception the animation of the symbol will disappear
and the transmitted temperature and humidity will appear in the display.
Background lighting
Touch the SNOOZE- / LIGHT field
2
. The background lighting
illuminates for 10 seconds. While plug in the adapter power have
continuous background lighting. In the battery or mains operation,
there are three levels of background lighting to choose from.
Reset function
Reset key function, press reset key
11
back of the main station will
be reset whole product, need setup again.
Troubleshooting
The product contains delicate electronic components. Thus radio
transmitting equipment in the immediate vicinity may interfere with the
product. If the display shows interference, move such objects away
from the product.
Electrostatic discharges can lead to malfunctions.
In cases of the product failing to work, remove the batteries for a short
while and then replace them.
Obstacles, e.g. concrete walls, may make the reception susceptible to
interference. In this event change the location. Please note, the outdoor
sensor should always be set up within a range of max. 100 metres
(open area) of the main station. The specified range is the open area
To Next Page
Loading...
Need help?
General
