Owon PC341-W-TY - Installation Procedure; Connecting Main CTs and Power Cable

11
4. Insert each 3.5mm audio plug of Main CT into the corresponding
audio jack on the top of the Power Meter:
• The CT measuring the L1/A line should plug into the audio jack
labeled L1/A.
• The CT measuring the L2/B line should plug into the audio jack
labeled L2/B.
• The CT measuring the L3/C line should plug into the audio jack
labeled L3/C.
21
21
21
21
Please refer to the picture below for the number and location of Main
CTs in dierent systems:
3-Phase Split-Phase Single Phase
05 Connect the power
1. Connect the power cable into the bottom of the main unit until it
clicks into place securely.