Owon PC341-W-TY - Installation Procedure; Main CTs Placement on Service Lines

10
2. Clamp one Main CT on each main seice lines. Make sure the arrow
on the CT must point towards the breakers! Your system may have 1,
2, or 3 main seice lines, and a corresponding number of Main CTs are
required.
3. If you have Line/Seice-side tap solar, Main CT must be clamped
between the electricity meter and incoming feeds from inveer.
OFF
P1
P2
Electricity Meter
Breakers
Warning: The seice
mains are always live!
kWh
OFF
Warning: The seice
mains are always live!
L1/A
L2/B
L3/C
Inveer