Need help?Do you have a question about the Owon XDM Series and is the answer not in the manual?
General| Brand | Owon |
|---|---|
| Model | XDM Series |
| Category | Measuring Instruments |
| Language | English |
Defines safety terms (Danger, Warning, Caution) and symbols used in the manual and on the product.
General precautions to avoid injury and product damage during operation.
Defines measurement limits to prevent damage and electric shock.
Specifies voltage limits for HI/LO sense terminals used in resistance measurements.
Defines measurement categories (CAT I, CAT II) and their applications.
Steps for checking the instrument for damage and verifying accessories upon receipt.
Physical dimensions of the multimeter.
Instructions for unfolding the foot stool.
Identifies and describes the components of the multimeter's front panel.
Identifies and describes the components of the multimeter's rear panel.
Explains the main elements and status icons displayed on the multimeter's screen.
Instructions for setting the voltage scale and fuse for AC power input.
Steps to power on the multimeter.
Diagrams showing how to connect test leads for various measurements.
Explains how to set the measurement range using auto or manual modes.
Describes the selectable measurement speeds and their impact on reading resolution.
Step-by-step guide for configuring and performing DC voltage measurements.
Step-by-step guide for configuring and performing AC voltage measurements.
Step-by-step guide for configuring and performing DC current measurements.
Step-by-step guide for configuring and performing AC current measurements.
Explains 2-wire and 4-wire resistance measurement methods and recommendations.
Step-by-step guide for performing a continuity test.
Step-by-step guide for performing a diode test.
Step-by-step guide for configuring and performing capacitance measurements.
Explains how to measure frequency and period using the multimeter.
Guide for setting up and performing temperature measurements with a transducer.
How to use the dual display to view two measurements simultaneously.
Explains the three trigger types: auto, single, and external.
Details the math functions: statistics, limits, dB/dBm, and relative.
Describes different display types: number, bar meter, trend chart, and histogram.
Covers manual and auto record functions, viewing, and exporting.
Explains how to configure serial, output, network, and LAN port settings.
Details system-related functions like language, backlight, clock, SCPI, and defaults.
How to view model, firmware version, and serial number.
Instructions for updating the instrument firmware via a USB memory device.
Explains how measurement loading errors occur in DC voltage measurements.
Describes the multimeter's true RMS AC measurement capabilities and formulas.
Explains input impedance and loading errors for AC voltage measurements at various frequencies.
Troubleshooting steps for when the instrument has no display.
Troubleshooting steps for when readings do not change with current input.
Detailed accuracy and specification tables for the XDM3051 model.
Temperature accuracy specifications for thermocouples and RTDs.
Details for manual and auto record functions, max readings, and sample interval.
Specifications for external trigger, VMC output, and trigger conditions.
Overall physical dimensions and weight of the multimeter.
Lists standard accessories included with the multimeter.
Provides guidelines for general care and cleaning of the instrument.
Step-by-step instructions for replacing the line fuse.
To Next Page
