Owon PC341-W-TY - Installation Procedure; Antenna and Main CTs Installation

9
03 Install the antenna
Locate the External Antenna outside the electrical panel to ensure that
that the Power Meter signal is not blocked by metal (The base of the
antenna has a magnetic and can be adsorbed on iron materials). After
that
,
screw the External Antenna to the Antenna connector.
04 Clamp Main CTs around seice mains
1. Open the clasps on the Main CTs(3.5mm audio plug) to see the arrow
(P1→P2) or (K→L) or you can nd it on the sticker on the outside of
the clamp. This is the direction of CT.
If you install the Power Meter into the electrical panel, you can use a
screwdriver to punch out a knockout cover in the electrical panel. Then
feed the External Antenna cable through the hole.
P2
P1