1.Safety Information
General Safety Requirements
Before any operations, please read the following safety precautions to avoid
any possible bodily injury and prevent this product or any other products
connected from damage. In order to avoid any contingent danger, this
product is only used within the range specied.
Use Proper Power Cord. Use only the power cord supplied with the product
and certied to use in your country.
Product Grounded. This instrument is grounded through the power cord
grounding conductor. To avoid electric shock, the grounding conductor must
be grounded. The product must be grounded properly before any connection
with its input or output terminal.
Limit operation to the specied measurement category, voltage, or
amperage ratings.
Check all Terminal Ratings. To avoid instrument damage and the risk of
electric shock, check all the Measurement Limits and markers of this product.
Refer to the user's manual for the Measurement Limits before connecting to
the instrument. Do not exceed any of the Measurement Limits dened in the
following section.
Do not operate without covers. Do not operate the instrument with covers or
panels removed.
Use Proper Fuse. Use only the specied type and rating fuse for this
instrument.
Avoid exposed circuit. Do not touch exposed junctions and components
when the instrument is powered.
Do not operate if in any doubt. If you suspect damage occurs to the
instrument, have it inspected by qualied service personnel before further
operations.
Use your instrument in a well-ventilated area. Inadequate ventilation may
cause increasing of temperature or damages to the device. Please keep well
ventilated and inspect the intake regularly.
Do not operate in wet conditions. In order to avoid short circuiting to the
interior of the device or electric shock, please do not operate in a humid
environment.
Do not operate in an explosive atmosphere.
Keep product surfaces clean and dry.
Only the qualied technicians can implement the maintenance.
To Next Page
Loading...
Need help?
General
