Need help?Do you have a question about the Owon XDM2041 Series and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| Display | LCD |
| True RMS | Yes |
| Continuity Test | Yes |
| Diode Test | Yes |
| Data Logging | Yes |
| Interface | USB |
| Frequency Range | 0-10MHz |
| Power Supply | AC Adapter or Battery |
Defines terms and symbols used for safety precautions.
Lists essential precautions for safe operation and to prevent damage.
Details voltage, current, and category limits to ensure safe operation.
Explains IEC measurement categories (CAT I, CAT II, etc.) for safety ratings.
Steps to check the instrument for damage and accessories upon receipt.
Physical dimensions of the multimeter.
Instructions on how to unfold and use the foot stool.
Identifies and describes front panel controls and displays.
Identifies and describes rear panel connectors and features.
Explains the graphical display and its elements.
Steps to connect power and turn on the multimeter.
Guides on connecting test leads for various measurement types.
How to select auto or manual ranging for measurements.
Options for selecting measurement speed (Low, Mid, High).
Step-by-step guide to perform DC voltage measurements.
Step-by-step guide to perform AC voltage measurements.
Step-by-step guide to perform DC current measurements.
Step-by-step guide to perform AC current measurements.
Guides for 2-wire and 4-wire resistance measurements.
Procedure for performing continuity tests.
Procedure for performing diode measurements.
Step-by-step guide to measure capacitance.
How to measure frequency and period of signals.
Guide for measuring temperature using a probe.
Functionality for viewing two measurements simultaneously.
How to freeze the current reading on the display.
Explains Max/Min, dB/dBm calculations.
Explains errors due to multimeter input resistance in DC voltage.
Details how the multimeter handles AC measurements and RMS values.
Explains errors due to input impedance and capacitance in AC voltage.
Discusses measurement inaccuracies with non-sinusoidal waveforms.
Solutions for cases where the instrument does not power on correctly.
Troubleshooting steps for when readings are static during current input.
Lists overall specifications like display, environment, safety, etc.
Lists standard accessories included with the multimeter.
Guidelines for maintaining and cleaning the instrument.
Instructions for replacing the main line fuse.
To Next Page
