Need help?Do you have a question about the Owon B35T and is the answer not in the manual?
General| Data Logging | Yes |
|---|---|
| Battery | 9V |
| Bluetooth | Yes |
| Continuity Test | Yes |
| Diode Test | Yes |
| Display | LCD |
| Measurement Categories | CAT III 600V |
| DC Current Range | 10A |
| AC Current Range | 10A |
| Resistance Range | 60MΩ |
| Frequency Range | 10MHz |
| Temperature Range | -20°C to 1000°C |
| Weight | 350 g |
Precautionary measures to avoid bodily injury and product damage during operation.
Defines the safety rating of the multimeter for different measurement environments and transient voltages.
Explains warning terms and symbols used in the manual and on the product for safety awareness.
Details the key functionalities and advantages of the digital multimeter.
Steps to check the instrument for damage and verify accessories after receiving it.
Procedure for correctly installing the required AA alkaline batteries into the multimeter.
Instructions on how to extend the multimeter's tilt stand for better viewing.
How to turn the multimeter on and off using the rotary switch.
Information on the automatic sleep mode and how it conserves power.
How to activate and deactivate the LCD backlight for low-light conditions.
How to use auto and manual range modes for measurements.
Overview of the multimeter's main controls and displays.
Detailed description and identification of the front panel components.
Explains the functions assigned to each position of the rotary switch.
Describes the operations of the function and range selection keys.
Explains the symbols and information shown on the multimeter's display.
Details the usage of various buttons like Range, Select, Hz/Duty, Max/Min, Hold, and Rel.
Lists and explains the various units of measurement used by the multimeter.
Describes the input terminal connections for different measurement functions and overload protection.
Step-by-step guide on how to measure AC and DC voltages using the multimeter.
Instructions for measuring electrical resistance, including safety precautions.
Procedure for testing the forward bias of diodes using the multimeter.
How to perform continuity tests, which include a beeping sound for low resistance.
Guide for measuring capacitance values, noting specific range durations.
Steps to measure frequency and duty cycle of signals.
How to measure the hFE value of NPN or PNP transistors using the multimeter.
Instructions for measuring temperature using a K-type thermocouple.
Procedure for safely measuring DC and AC currents, including terminal selection and warnings.
How to freeze the current display reading on the multimeter screen.
Using the multimeter to record and display the maximum and minimum measured values.
Performing measurements by comparing the current reading to a stored reference value.
Explains the different audible alerts and sounds the multimeter can produce.
Specifies the system requirements for Android devices to use the Bluetooth feature.
Guide on downloading and installing the OWON Multimeter application software.
Step-by-step instructions for pairing the multimeter with an Android device via Bluetooth.
Explains the layout and navigation of the multimeter application's user interface.
How to customize the displayed name of the multimeter within the application.
Covers adding, selecting, disconnecting meters, remote control, and voice output features.
Instructions for upgrading the multimeter's firmware through the application.
How to view measurement data in graphical and tabular formats within the app.
Provides comprehensive technical data for all multimeter functions and features.
Details which models support specific features like Bluetooth, True RMS, and auto-ranging.
Lists the standard accessories included with the multimeter and optional accessories.
Guidelines for maintaining and cleaning the multimeter to ensure longevity and accuracy.
Step-by-step instructions for replacing the multimeter's internal fuse.
To Next Page
